13
2.2 Fix the anchor bolts.
Drilling the hole for the anchor bolt with the rotary hammer drill, type the anchor
bolt into the ground, and then fasten it with ratchet spanner
(See Fig. 23).Note:
The torque of anchor bolt is 150N.m, the length inside ground of anchor bolt must
be over 3-1/2”.
F. Install platform runway connecting bar
,Install Limit rod
.
(See Fig. 24).
Drilling
Clearing
Bolting
Tighten
88/88A
Fig. 23
For the lifts
：
use
19 driller to drill hole
For the control cabinet
：
use
10 driller to drill hole
Fig. 24
3
-1
/
2
”
39
