Arm the system
Function Buttons
Stay
- Will arm the perimeter only*
Away
- Will arm the entire system
Chime
- Press and hold to toggle between door chime on and off
Bypass
- Use the scroll keys [< >] to find the zone to be bypassed
Press [*]
Press [#] to exit
Exit
- Allows you to leave the premises through your delay zone without
having to disarm and rearm the system
*Stay will typically bypass the interior motion sensors, ask your installer for
a specific configuration.
Disarm the system
Enter your 4 digit security code
Viewing Trouble
Conditions
Press [*][2]
Use the scroll keys [< >] to view the troubles
Press [#] to exit
Silence Troubles
Press any button on the keypad
Viewing Alarm
Memory
Press [*][3]
Use the scroll keys [< >] to view
Press [#] to exit
Adding, Changing,
or Deleting an
Access Code
Press [*][5][Master Code]
Use scroll keys [< >] to find user code to be edited
Press [*] to select
To Add: Enter 4 digit code
To Change: Enter new 4 digit code
To Delete: Press [*]
Press [#] to exit
*Master code is user code 40
Setting Date/Time
Press [*][6][Master Code][1]
Enter time (0:00 - 23:59)
Enter Date (mm/dd/yy)
Press [#] to exit
Resetting a smoke
detector
Clear area of all smoke
Enter your 4 digit code to silence the siren
Use of panic buttons Press and hold for 2 seconds
Duress Code
Press 4444 for a silent panic alarm (Unless your duress code has been changed)
QUICK REFERENCE
PARTNER IMPASSA
SCW9057 LCD QUICK REFERENCE
This card provides basic operation of the most commonly
used features on your security alarm system. If you need
more information, please consult your owner’s manual or
call Amherst Alarm at
(716) 632-4600
.
www
.A
mherst
A
lArm
.
com
