- 16 -
In order to change the rinse aid level, follow the below
steps before turning on the machine:
• Open the door of the machine.
• Turn on the machine, and press the Programme button as soon as the
machine is turned on.
• Hold down the Programme button until “rA” disappears. Rinse aid set-
ting follows water hardness setting.
• The machine will display the last setting. Change the level by pressing
the programme button.
• Turn off the machine to save the setting.
The factory setting is “4”. If the dishes are not drying properly or are
spotted, increase the level. If blue stains form on your dishes, decrease
the level.
Level
Brightener Dose
Indicator
1
Rinse-aid not dispensed
r1 is shown on the display.
2
1 dose is dispensed
r2 is shown on the display.
3
2 doses are dispensed
r3 is shown on the display.
4
3 doses are dispensed
r4 is shown on the display.
5
4 doses are dispensed
r5 is shown on the display.