23
Warning: Use only rinse aid designed for domestic dishwashers. Wipe up spilled rinse aid
with a cloth as it will cause the formation of large amounts of foam, and thus will reduce
the dishwashing effectiveness.
If the water hardness is higher than the maximum values given in the table above, or if you use water
from a deep well, it is recommended to use filters and water treatment equipment.
NOTE: The factory settings are for the water hardness level 3.
Water hardness table
Water hard-
ness
German
degrees
[dH]
French
degrees
[dF]
British
degrees
[dE]
Water hardness level indicator
Special salt
consumption
[g/cycle]
1
0 ~ 5
0 ~ 9
0 ~ 6
H1 Rapid
0
2
6-11
10-20
7-14
H2 90 Min
9
3
12-17
21-30
15-21
H3 90 Min; Rapid
12
4
18-22
31-40
22-28
H4Eco
20
5
23-34
41-60
29-42
H5 Eco; Rapid
30
6
35-55
61-98
43-69
H6 Eco; 90 Min
60
The use of detergents
Use a detergent for domestic dishwashers. On the
market you can find detergent intended for dish
-
washers in the form of powder, gel and tablets.
The detergent must be placed in the dispenser
before starting the dishwasher. Store detergent in
a cool and dry place, out of reach of children.
Do not overfill the detergent dispenser, otherwise
the detergent may not dissolve completely and
leave streaks on the dishes.
If you need more information on the detergent
used, please contact the manufacturer directly.
1. Switch on the appliance;
2. Press the Rapid button for more than 5 seconds
to start the water softener set model within
60seconds after the appliance was switched on;
3. Press the Rapid button to select the proper set
according to your local environment, the sets will
change in the following sequence:
H1->H2->H3->H4->H5->H6;
4. Press the Power button to end the set up
model.