- 30 -
CHANGING THE DIRECTION
OF THE DOOR OPENING
FIGURE 1: Door opening from left
side
FIGURE 2: Door opening from
right side
1 Screw / 2 Lower hinge / 3 Levelling legs / 4 Levelling legs / 5 Upper
hinge / 6 Upper hinge cover / 7 Hole cover plate / 8 Opposite two
holes
This bar refrigerator has the door hinges on the right. If you
wish to change the opening direction, follow the instructions
below:
Remove the upper hinge cover (6) first.
Remove the two screws (1) that hold the upper hinge (5) (right side) to
the frame. Take away the upper hinge (5).
Lift the door and place it on a padded surface to prevent scratching.
Remove the two screws (8) that hold the lower hinge (2), remove the
lower hinge (2).
Remove the left front leg (4) and transfer it to the right side.
Remove the hole cover plate (7) on the right side.
Install the lower hinge (2) onto the left side of the lower frame with the
two screws through the opposite two holes (8).
Set the door in its place making sure it rests on the door seat at the
lower hinge (2).
While holding the door in the closed position secure the upper hinge (5)
on the top left hand side with the two screws (1) through the opposite
two holes. Do not tighten the two screws (1) until the top of the door is
levelled with the counter top.
Install the upper hinge cover (6) on the upper hinge.
Summary of Contents for FM0613
