18
OPERATION
Switching off the appliance
● The hob operates when at least one cooking zone is on.
● To switch off the appliance touch the on/off sensor (1).
If the cooking zone is still hot, the relevant display (3) will show the letter „H” to indicate
residual heat.
Switching off cooking zones
● A given cooking zone must be active. Heat setting display is bright.
● To switch off a cooking zone touch the on/off sensor field or touch the lower heat setting
sensor field „-” (4) to reduce the heat setting to „0”.
Booster function „P”
The Booster Function increases the nominal power of the ø 220 mm cooking zone from
2300W to 3000W.
In order to activate the Booster function, select the cooking zone, set the heat setting to „9”
and then touch the „+” (2) sensor field again. The letter „P” will be shown on the display.
To deactivate the Booster function, touch the „-” (4) sensor field to reduce the heat setting or
lift the cookware from the cooking zone.
For 220 mm cooking zone, operation of the Booster function is limited to 5 mi-
nutes. Once the Booster function is automatically deactivated, the cooking zone
continues to operate at its nominal power.
The Booster function can be reactivated, provided the appliance electronic
circuits and induction coils are not overheated. When the pot is lifted from the
cooking zone when the Booster function is in operation, it remains active and
the countdown continues.
When the appliance electronic circuits or induction coils overheat when the Bo-
oster function is in operation, it is automatically deactivated. The cooking zone
continues to operate at its nominal power.
