21
OPERATION
Limiting the operating time
In order to increase efficiency, the induction
hob is fitted with a operating time limiter for
each of the cooking zones. The maximum
operating time is set according to the last heat
setting selected.
If you do not change the heat setting for a long
time (see table) then the associated cooking
zone is automatically switched off and the
residual heat indicator is activated. However,
you can switch on and operate individual co-
oking zones at any time in accordance with
the operating instructions.
Timer countdown can be set independently for all cooking zones.
Timer
Timer function makes cooking easier by making it possible to set cook time. It can also be
used as a Kitchen Timer.
Setting the Timer
Timer function makes cooking easier by making it possible to set cook time. It can also be
used as a Kitchen Timer.
● Touch cooking zone selector sensor field (5) to select a cooking zone. The number „0”
will become bright.
● Touch „+” (2) or „-” (4) sensor field to set the desired heat setting ranging from 1 to 9.
● Activate timer by simultaneously touching „+” (2) and „-” (4) sensor fields within 10 se
-
conds.
● Touch „+” (2) or „-” (4) sensor field to set the desired cooking time (01 to 99 minutes).
Decimal dot will be shown on the corresponding cooking zone display to indicate that
cooking zone operation is controlled by the timer function.
In order to conserve electricity,
after 30 minutes heating setting „9”
will be automatically reduced to the
heat setting „8”, but cook time will
not change.
Cooking heat
setting
Maximum
operating time
(hours)
2
1
8,6
2
6,7
3
5,3
4
4,3
5
3,5
6
2,8
7
2,3
8
2
9
1,5
P - Ø 220
0,08
