27
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
REMEDY
7.Residual heat indicator
extinguished even though
the cooking zones are hot
- a power outage or the
appliance has been discon-
nected
- residual heat indicator will
be shown again the next
time the appliance is turned
on and off again
8.
Hob cooking surface is
cracked.
Danger! Immediately unplug the appliance or
switch off the main circuit breaker. Refer the repair
to the nearest service centre.
9.When the problem is still
not remedied.
Immediately unplug the appliance or switch off the main circuit
breaker (fuse). Refer the repair to the nearest service centre.
Important!
You are responsible for operating the appliance correctly and
maintaining its good condition. If you call service as a result of
operating the appliance incorrectly you will be responsible for
the costs incurred even under warranty.
The manufacturer shall not be held liable for damage caused
by failure to follow this manual.
10.Induction hob makes
buzzing sound.
This is normal. Cooling fan is operating to cool down internal
electronics.
11. Induction hob makes his-
sing and whistling sounds.
This is normal. When using several cooking zones at full power,
the hob makes hissing and whistling sounds due to the frequen-
cies used to power the coils.
12.
E2
symbol displayed
Induction coil overheated
- insufficient cooling,
- verify if the induction hob is bu-
ilt in according to instructions.
- check if cookware complies
with requirements listed on
page 15.