19
Features and components (Figure 1)
1.
Speed control knob
2.
Multifunction head release lever
3.
Lid
4.
Removable cover of the mincer socket
5.
Stainless steel bowl (max. 4.5 l)
6.
Whisk
7.
Beater
8.
Dough hook
9.
Feeder tray
10. Pusher
11. Sausage attachment
12. Bowl splash cover
13. Kebbe attachment
14. Separator
15. Conical attachment
16. Fine mesh meat grinder plate
17. Coarse mesh meat grinder plate
18. Cutting blades *
19. Spiralizer *
20. Multifunction head
FEATURES AND COMPONENTS
Before first use (Fig 2)
A
Release and raise the multifunction head to add accessories and then lock it
1. Push the lever (2) to the side to release the multifunction head (20) and raise it to a higher position.
2. Place the bowl (5) in the appliance, turn it until it locks, and place the ingredients in the bowl.
3. Place the splash cover on the mixer head so that the filler hole is accessible at the front of the appli
-
ance.
4. Install the desired accessory (6, 7, 8) in the socket by pushing the accessory shaft all the way and
turning it a quarter turn to lock it in place.
5. Lock the multifunction head in a horizontal position and push the lever to the side (2), you should
hear a click.
6. When preparing your dish, you can add ingredients through the opening in the splash cover.
7. To stop the appliance, turn the knob (1) back to position 0.
Before first use, wash all accessories with water and detergent, rinse and dry.
Summary of Contents for KML 4011
Page 9: ...9 2 B ...
Page 31: ...31 ...
