20
Daily cleaning and proper maintenance have
crucial impact on the durability of your ce ra-
mic plate.
Cleaning the plate after every
use
● Wipe off slight, not-burnt patches of
dirt
using damp cloth without cleaning
agent. Washing liquid can cause blue
discoloration to appear on the plate. The
stains often cannot be removed after first
cleaning, even if special cle aning agents
are used.
●
Re mo ve larger patches of dirt, strongly
sticking to the plate using sharp scrap-
per and wipe off the surface with a damp
cloth.
CLEANING AND ROUTINE MAINTENANCE
Cleaning scrapper
Clean the ceramic plate observing
the same rules as for glass. Never
use abrasive or aggressive clean-
ing agents, scrubbing powders or
scratching sponges. Also do not use
steam cleaning devices.
Removal of stains
●
Li ght pearly stains (aluminium re si du-
es)
can be removed from cooled plate
using special cleaning agents. Cal ca-
re ous re si du es (i.e. boiled over wa ter)
can be re mo ved with vinegar or spe cial
cle aning agents.
●
Do not switch off the hotplate when re mo-
ving sugar, sugar-containing di shes, pla-
stic or aluminium foil! Im me dia te ly scrape
off the residuals (when still hot) from the
hotplate using a sharp scrap per. When
the dirt is re mo ved you can switch off the
plate and after cooling it down clean it
aga in using special cle aning agents.
Special cleaning agents can be bought in
su per mar kets, special electromechanical
shops, drugstores and shops with kitchen
appliances. Sharp scrappers can be bo ught
in DIY shops, shops with building tools and
painting ac ces so ries.
Never apply cleaning agent on a hot hotplate.
Leave the cleaning agent to dry and then
wipe it off with a damp cloth. Any residuals
of cleaning agents should be wiped off with
a damp cloth before the next heating as oth-
erwise they can have caustic effect.
Failure
to observe the ceramic plate maintenance
instructions can result in losing your war
-
ranty rights!
Attention!
If from any reason you are not able to
control the switched on plate, switch
off the main switch or screw out the
fuse and call the Customer Service.
Attention!
Should cracks or splits appear on
the surface of your ceramic plate,
immediately disconnect the plate
from the mains (by switching off the
fuse or unplugging the plug) and call
the Customer Service.
