Amica PES36G, Instruction Manual

9

Electrical connection

Warning: 

This appliance must be earthed.

The appliance is supplied fitted with a power cord and 3 pin plug protected by 13amp fuse. 

The cable type must be a minimum of H05VV-F (PVC insulated and sheathed) 3 cores x 

1,5mm

2

. The power supply plug must be accessible to allow disconnection of the appliance 

in the installed position. The supply cable should be positioned so that it does not reach a 

temperature of more than 75 °C along its entire length.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or 

similarly qualified persons in order to avoid a hazard.

Attention: 

Disconect the electric power supply before performing technical assistance or 

maintenance on the product.

In case of replacement of the electric cable, ensure the use of an electric cable certified 

according to the Standards in force and suitable to the technical features of the product.

INSTALLATION

Please carefully read this user manual and follow all instructions. Information 

concerning the hob can be found on the rating plate. 

Switch on the appliance:

Activate the selected cooking zone (1,2) by turning knob (3). Pilot light will come on (4). The 

heat setting can be adjusted by turning the knob as required. The heat setting of the cooking 

zones can be adjusted in steps by turning the knobs. This allows efficient use of the electricity 

according to user’s needs and helps prevent wasting electricity. 

What to do before using your electric hob for the first time? 

Before first use, heat up the cooking zones for 4 minutes without cookware.

Switch on the ventilation in the room or open a window, as the appliance could 

emit an unpleasant smell during first use.