14
Amico Accessories Inc.
Monitor Shelf: 6" (152.4 mm) Drop On
WARNING:
ENSURE THE MOUNTING SHELF IS SECURE AND VERTICAL TO PREVENT THE MONITOR FROM SLIDING
AND/OR FALLING.
NOTE:
Quick installation system: On the back of the mounting plate there is a plunger that secures the plate to
the mounting adapter. Simply slide and align the adapter to the shelf and the plunger will automatically engage
and lock.
1. First, install the mounting adapter to the back of the monitor (Please refer to the adapter installation manual
provided with the adapter).
2. Lift the monitor and slide the mounting adapter plate on to the mounting shelf. Slide the monitor down until
the mounting hole on the mounting adapter aligns with the plunger
(Figure 1)
. When the hole and the plunger
are perfectly aligned the plunger will automatically lock. If the plunger does not lock automatically then lock the
plunger manually by turning it. Tighten the locking screws by hand to the tightest possible position
(Figure 2)
.
Figure 1
Figure 2
Mounting
shelf
Plunger Lock
Locking screws
Mounting adapter
plate
Mounting hole
Section 3: Installation to Monitor and Accessory
