www.amico.com
11
WARNING
Danger of injury from unfolding spring arm.
1. Gently pry the two halves of the cover apart and set
aside.
2. Remove two screws (1) from receptacle mount. Move
receptacle mount (2) to provide access for mounting.
3. Install ceiling arm.
CAUTION
Light may fall if inaccurately fastened.
• Locking rings must click into groove and be
evenly positioned all around.
4. First install washer (1), then safety washer (2), followed
by two locking rings (3). Ensure tooth on safety
washer aligns with the hole in the wall mount stem
(4).
5. Replace the receptacle mount (1). Reinstall two screws
(2), do not over tighten.
6. Gently replace covers and snap together
7. To continue with installing the Lighthead see
Installing the Lighthead
section of this manual
Installing Wall Arm
1
1
2
4
1
2
3
2
2
1
