4
Amico Corporation
1. Place the Artwall Back Box on the wall structure (See
Figures 1 & 2
).
IMPORTANT:
Allow gap between back box flange to stud faces for drywall to be attached later (See
Figure 3
).
2. Attach Artwall back box to wall structure using hardware compliant to the local building codes.
NOTE:
Make sure to use appropriate screw to attach the back box onto the wall structure as screws are exposed
to the end users.
Installation
Gap for Drywall
Figure 1
Figure 3
Figure 2
Wall Structure
Artwall Back
Artwall Back Box Installation on Building Studs
Artwall Setup In Place
Top View
Building Studs Facing Each Other
