Amico Roll Stand INE-0909-12-12-F4-M, Installation Instructions Manual

     www.amico.com     

11

Mounting Infusion Pump

Follow the Infusion Pump manufacturer’s instruction to mount device onto the 1.25

"

 (3.2 cm) diameter post.

Section 4: Device Installation

Section 5: Adjustments

Rotation of Arms

WARNING:

 The Infusion Arm has approximately 180° rotation. Ensure proper clearance to avoid collision. 

NOTE:

 If the Arm becomes too difficult to rotate or too loose, please contact Amico Accessories. 

NOTE:

 Adjusting the rotational tension of the Extension Arms can be done by loosening or tightening the 

BOLT

 at the joints of the Arms and the 

ADAPTER

 using a 12

"

 socket at the 

HEAD,

 and ¾

"

 socket wrench or 

equivalent tool at the 

ADAPTER

 end. Be careful not to over loosen.

To rotate the 

PRIMARY ARM

, push on the side of the 

PRIMARY ARM

 (near the center). To rotate the 

SECONDARY ARM

(double extension configurations only), hold the 

PRIMARY ARM

 and push the side of the 

SECONDARY ARM

. 

Figure 17

 shows the product in the straight position while 

Figure 18

 shows the product in folded position 

(

SECONDARY ARM

 folded in). 

HEAD

[X-LPM-ADA]

BOTTOM POST

[X-TRI-125-12]

3 x SCREWS

[H-MPF-1032-12]

3 x WASHERS

[H-WLM-10]

PLATE

[MON-CPU-DISK]

SWIVEL DISK

[MON-SWIV-DISK]

NUT

[H-LNUT-M8-NYL-FL]

Figure 2

PRIMARY ARM

Figure 1

PRIMARY ARM

SECONDARY ARM

PROJECT #: 617

FOR USE WITH INE-___-12-12-__

CUSTOMER

Adjustments:

WARNING: The 

INE ARM(s)

 has approximately 180  rotation. Ensure proper clearance to avoid collision.

ARM 

Rotation:

To rotate the 

PRIMARY

ARM

, push on the side of the 

PRIMARY

ARM

 (near the center). To rotate the 

SECONDARY ARM

 (INE-

0909-12-12-__-__ configurations only), hold the 

PRIMARY ARM

 and push on the side of the 

SECONDARY ARM

. Figure 1 

shows the product in the straight position while Figure 2 shows the product in folded position (

SECONDARY ARM

 folded in)

5

4

3 2

1

DESCRIPTION:

PART NO:

SCALE: 

DRAWN BY: 

CHECKED BY: 

SHT.

OF

DRAWING NO:

NTS

3

6

PRIVATE AND CONFIDENTIAL

THIS PRINT IS PROPERTY OF AMICO ACCESSORIES 

AND IS LOANED IN CONFIDENCE SUBJECT TO RETURN 

UPON REQUEST AND WITH THE UNDERSTANDING THAT 

NO COPIES ARE TO BE MADE WITHOUT THE CONSENT 

OF AMICO ACCESSORIES

ALL RIGHTS TO DESIGN OR INVENTION ARE RESERVED

DATE:
DATE:

-

HP

2018-01-19

-

-/-/-

85 Fulton Way

Richmond Hill, Ontario

L4B 2N4, Canada

Toll Free: 1.877.264.2697 (T)

Tel: (905) 763.7778

Fax: (905) 763.8587

-

INE-___-12-12-__-__

20180119-4415

PROJECTION

www.amico.com

Figure 17 

Figure 18

PRIMARY ARM

PRIMARY ARM

SECONDARY ARM