8
Amico Accessories Inc.
Section 3: Installation
Installation to MOUNTING PLATFORM
WARNING:
Do not attempt to mount the Infusion Arm with any devices already installed. Doing so could
result in damage or injury.
WARNING:
Ensure
RAIL
is stable and properly installed before mounting.
Mounting to MONITOR RAIL SYSTEM (MRS) (-M)
1. Lift up the
INFUSION ARM
and guide the
MOUNTING ADAPTER
into the top of the
MRS RAIL
as seen in
Figure 5
.
2. Once the
ARM
is positioned at the desired height in the
MRS RAIL
, tighten all
4x SET SCREWS
to the tightest
possible position on the
MOUNTING ADAPTER
using a 1/8
"
hex key.
BOTTOM
STOPPER
ONE-WAY
STOPPER
MRS RAIL
: LENGTH FOR REPRESENTATIONAL USE ONLY
MRS
MOUNTING
ADAPTER
SET SCREWS
Figure 5
Figure 6
