www.amico.com
11
TO RAISE THE PERMANENT IV POLE
a. Grasp the stored IV pole and raise it from its stored position. Make
sure it is secure in its support bracket. The pole should drop into the
support bracket.
b. Grasp the top section of the IV pole, loosen the knob and raise it until
the desired height is reached. Tighten the knob to hold the IV pole in
position.
TO LOWER THE PERMANENT IV POLE
a. Loosen the knob to release the IV pole.
b. Manually lower the top section of the pole until it fully collapses.
c. Lower the IV pole to its stored position (resting in the IV pole cradle).
Permanent Telescopic IV Pole
