www.amico.com
15
Cleaning
BLEACH CLEANING INSTRUCTIONS
If none of the approved cleaning products provide the disinfectant level required then use a solution of 5.25% Sodium
Hypochlorite diluted to 1 part bleach to 50 parts water (1000 ppm), (volume to volume).
Bleach products are corrosive and degrading in nature and may cause damage to your product. If bleach is used,
measures must be taken to ensure the product is rinsed thoroughly with clean water and thoroughly dried. Failure to
rinse and dry the product will leave a corrosive residue on the surface possibly causing corrosion.
• Failure to follow the above directions may void the product’s warranty.
• Do not immerse the product in water.
• Do not attempt to clean or degrease the steel.
• Use only approved cleaning products. If bleach is being applied to the product, strictly adhere to the Bleach
Cleaning Instructions.
• Do not use a water temperature of more than 50°C or °F.
All Surfaces
• For mattresses please refer to mattress cleaning instructions.
Before Cleaning
• Set the stretcher on brake by pressing on the brake pedals to the brake position.
During Cleaning
• Do not use abrasive cleaning products.
• Do not use oil based products.
• Do not use a steam cleaner, washing tunnel, high-pressure spray or hose.
To Wash
• Wipe with a sponge or soft cloth wetted with warm water containing soap or mild detergent.
To Dry
• Thoroughly wipe with a dry sponge or soft cloth.
To Disinfect
• Wash the surface with one of the approved cleaners or refer to the Bleach Cleaning Instructions if bleach needs
to be used.
• Wipe off residue with water using a soft cloth or sponge.
• Thoroughly dry.
