P/N: 01035
1
EN - OPERATING INSTRUCTIONS
(Translation of the original instructions)
Hydraulic jack 2T (8,5kg)
ATTENTION:
Read this operating and use manual before
use or installation.
The supplier is not responsible for any damage or injury
resulting from incorrect use not in accordance with the
instructions.
GENERAL DESCRIPTION OF THE JACK
1. Front wheels.
2. Rear swivel castors.
3. Lifting arm foot.
4. Lifting arm.
5. Linkage lever.
6. Linkage body.
7.
Oil filler plug (screw).
8. Safety valve.
9. Lever lock screw.
EXPLANATION OF SYMBOLS USED
READ THIS OPERATING MANUAL BEFORE USING THE
UNIT!
PROTECTIVE GOGGLES MUST BE WORN. Eye protection
is compulsory when using the device.
USE PROTECTIVE GLOVES. Protective gloves should be
used when carrying out certain jobs to increase
operator safety.
GENERAL WARNING SIGN. The content preceded by the
warning sign shall contain important information on the
safe use of the device
PURPOSE
The device is not intended for use in professional factories
but rather for use by do-it-yourself. The device is designed for
lifting vehicles with the total weight not exceeding 2000 kg.
The jack must be used only for lifting or lowering and must
not be used to hold the raised vehicle. Use the jack only for its
intended purpose. Max. rated weight refers to the maximum
lift opening. Any use other than that described in this manual is
not in compliance with the intended use of the device. Damage
or injury resulting from improper use is the responsibility of
the user/owner and not the manufacturer. Please note that
our device is not intended for professional or industrial use.
The guarantee agreement does not apply if the device has
been used in craft or industrial facilities or for similar activities.
PRELIMINARY ACTIVITIES
Open the packaging and pull out the unit. Remove protective
film and transport securing (if fitted). Check that the appliance
and accessories have not been damaged in transit. Keep the
packaging until the warranty period has expired.
ATTENTION!
The device and its packaging are not for
play! Keep out of reach of children! Danger of swallowing or
suffocation!
Steps to be taken before start-up. First check that all screw
connections are firmly tightened. Then check that all moving
parts are in good working order and that there are no cracks
on the unit which could affect its proper operation.
RULES FOR SAFE USE
WORKPLACE
• The workstation should be kept clean.
• You must ensure that it is well lit.
•
Insufficient lighting or a messy work area can cause
accidents.
• The ground on which the lift is set up must be solid, stable
1
3
4
7
8
9
5
6
2
EN
