Industry Cellular Gateway
Advanced Configuration
Item
Value setting
Description
Regulatory Domain
The default setting is
according to where
the product sale to
It limits the available radio channel of this device.
The permissible channels depend on the
Regulatory Domain
.
Beacon Interval
100
It shows the time interval between each beacon packet broadcasted.
The beacon packet contains
SSID
,
Channel ID
and
Security setting
.
DTIM Interval
3
A
DTIM (Delivery Traffic Indication Message)
is a countdown informing
clients of the next window for listening to broadcast message. When the
device has buffered broadcast message for associated client, it sends the next
DTIM with a DTIM value.
RTS Threshold
2347
RTS (Request to send) Threshold
means when the packet size is over the
setting value, then active
RTS
technique.
RTS/CTS is a
collision avoidance
technique.
It means RTS
never
activated when the threshold is set to
2347
.
Fragmentation
2346
Wireless frames can be divided into smaller units (fragments) to
improve
performance
in the presence of RF interference at the limits of RF coverage.
WMM
The box is checked by
default
WMM (Wi-Fi Multimedia)
can help control
latency
and
jitter
when
transmitting
multimedia content
over a wireless connection.
Short GI
By default
400ns
is
selected
Short GI (Guard Interval)
is defined to set the sending interval between each
packet. Note that lower
Short GI
could
increase
not only the
transition rate
but also
error rate
.
TX Rate
By default
Best
is
selected
It means the
data transition rate
. When
Best
is selected, the device will
choose a proper
data rat
e according to
signal strength
.
RF Bandwidth
By default
Auto
is
selected
The setting of RF bandwidth limits the maximum data rate.
Transmit Power
By default
100%
is
selected
Normally the wireless transmitter operates at 100% power. By setting the
transmit power
to control the Wi-Fi
coverage
.
5G Band Steering
The box is unchecked
by default
When the client station associate with 2.4G Wi-Fi, the device will send the
client to 5G Wi-Fi automatically if the client is available on accessing this 5G
Wi-Fi band.
This option is only available on the module that supports 5GHz band.
WIDS
The box is unchecked
by default
The WIDS (Wireless Intrusion Detection System) will analyze all packets and
make a statistic table in WiFi status.
Go to
Status
>
Basic Network
>
WiFi
tab
for detailed WIDS status.
Save
N/A
Click the
Save
button to save the current configuration.
Undo
N/A
Click the
Undo
button to restore configuration to previous setting before
saving.
100
