Industry Cellular Gateway
Port
is the same with
Public Port
number.
Public Port
is selected
Single Port
and specify a port number, and
Private Port
can be set a
Single Port
number.
Public Port
is selected
Port Range
and specify a port range, and
Private Port
can be selected
Single Port
or
Port Range
.
Value Range
: 1 ~ 65535 for Public Port, Private Port.
When
“TCP & UDP”
is selected
It means the option “Protocol” of packet filter rule is TCP and UDP.
Public Port
selected a predefined port from
Well-known Service
, and
Private
Port
is the same with
Public Port
number.
Public Port
is selected
Single Port
and specify a port number, and
Private Port
can be set a
Single Port
number.
Public Port
is selected
Port Range
and specify a port range, and
Private Port
can be selected
Single Port
or
Port Range
.
Value Range
: 1 ~ 65535 for Public Port, Private Port.
When
“GRE”
is selected
It means the option “Protocol” of packet filter rule is GRE.
When
“ESP”
is selected
It means the option “Protocol” of packet filter rule is ESP.
When
“SCTP”
is selected
It means the option “Protocol” of packet filter rule is SCTP.
When
“User-defined”
is selected
It means the option “Protocol” of packet filter rule is User-defined.
For
Protocol Number
, enter a port number.
Time Schedule
1. An optional filled setting
2.
(0)Always
Is selected by
default.
Apply Time Schedule to this rule; otherwise leave it as (0)Always. (refer to
Scheduling setting under Object Definition)
Rule
1. An optional filled setting
2.The box is unchecked by
default.
Check the Enable box to activate the rule.
Save
N/A
Click the
Save
button to save the settings.
Undo
N/A
Click the
Undo
button to cancel the settings.
Back
N/A
When the
Back
button is clicked the screen will return to previous page.
116
