Industry Cellular Gateway
QoS checkbox in the
Multiple Bound Services
field is checked before the
Host
Group
option become available. Refer to
Object Definition > Grouping > Host
Grouping.
Service
1. A Must filled
setting.
2.
All
is selected by
default.
Specify the service type of traffics that have to be applied with the QoS rule. It
can be
All
,
DSCP
,
TOS
,
User-defined Service
, or
Well-known Service
.
Select
All
for all packets.
Select
DSCP
for DSCP type packets only.
Select
TOS
for TOS type packets only. You have to select a service type
(
Minimize-Cost
,
Maximize-Reliability
,
Maximize-Throughput
, or
Minimize-
Delay
) from the dropdown list as well.
Select
User-defined Service
for user-defined packets only. You have to define the
port range and protocol as well.
Select
Well-known Service
for specific application packets only. You have to
select the required service from the dropdown list as well.
Resource,
and
Control Function
A Must filled setting
Specify the Resource Type and corresponding Control function for the QoS rule.
The available Resource options are
Bandwidth
,
Connection Sessions
,
Priority
Queues
, and
DiffServ Codepoints
.
Bandwidth
: Select
Bandwidth
as the resource type for the QoS Rule, and you
have to assign the min rate, max rate and rate unit as the bandwidth settings in
the
Control Function
/
Set MINR & MAXR
field.
Connection Sessions
: Select
Connection Sessions
as the resource type for the
QoS Rule, and you have to assign supported session number in the
Control
Function
/
Set Session Limitation
field.
Priority Queues
: Select
Priority Queues
as the resource type for the QoS Rule,
and you have to specify a priority queue in the
Control Function
/
Set Priority
field.
DiffServ Code Points
: Select
DiffServ Code Points
as the resource type for the
QoS Rule, and you have to select a DSCP marking from the
Control Function
/
DSCP Marking
dropdown list.
QoS Direction
1. A Must filled
setting.
2.
Outbound
is
selected by default.
Specify the traffic flow direction for the packets to apply the QoS rule.
It can be
Outbound
,
Inbound
, or
Both
.
Outbound
: Select
Outbound
to prioritize the traffics going to the Internet via the
specified interface. Under such situation, the hosts specified in the Group field is
a source group.
Inbound
: Select
Inbound
to prioritize the traffics coming from the Internet via
the specified interface. Under such situation, the hosts specified in the Group
field is a destination group.
Both
: Select
both
to prioritize the traffics passing through the specified interface,
both Inbound and Outbound are considered. Under such situation, the hosts
specified in the Group field can be a source or destination group.
149