Industry Cellular Gateway
When
MAC Address-based
is selected, only MAC address can be added in
Member to Join.
When
Host Name-based
is selected, only host name can be added in
Member
to Join.
Note: The available Group Type can be different for the purchased model.
Member to Join
N/A
Add the members to the group in this field.
You can enter the member information as specified in the Member Type above,
and press the
Join
button to add.
Only one member can be add at a time, so you have to add the members to the
group one by one.
Member List
NA
This field will indicate the hosts (members) contained in the group.
Bound Services
The boxes are
unchecked by default
Binding the services that the host group can be applied. If you enable the
Firewall
, the produced group can be used in firewall service. Same as by enable
QoS
, or other available service types.
Note
: The supported service type can be different for the purchased product.
Group
The box is unchecked
by default
Check the
Enable
checkbox to activate the host group rule. So that the group
can be bound to selected service(s) for further configuration.
Save
N/A
Click
Save
to save the settings
Undo
N/A
Click
Undo
to cancel the settings
158
