Industry Cellular Gateway
Remote Subnet List
A Must fill setting
Specify the Remote Subnet IP address and Subnet Mask.
Click the Add or Delete button to add or delete Remote Subnet setting.
Remote Gateway
1. A Must fill setting.
2. Format can be a
ipv4 address or FQDN
Specify the Remote Gateway.
Authentication Configuration Window
Item
Value setting
Description
Key Management
1. A Must fill setting
2. Pre-shared Key 8 to
32 characters.
Select Key Management from the dropdown box for this IPSec tunnel.
IKE+Pre-shared Key
:
user needs to set a key (
8 ~ 32
characters).
IKE+X.509
:
user needs Certificate to authenticate. IKE+X.509 will be available
only when Certificate has been configured properly. Refer to Certificate section
of this manual and also
Object Definition > Certificate
in web-based utility.
Manually
:
user needs to enter key ID to authenticate. Manual key configuration
will be explained in the following Manual Key Management section.
Local ID
An optional setting
Specify the Local ID for this IPSec tunnel to authenticate.
Select
User Name
for Local ID and enter the username. The username may
include but can’t be all numbers.
Select
FQDN
for Local ID and enter the FQDN.
Select
User@FQDN
for Local ID and enter the User@FQDN.
Select
Key ID
for Local ID and enter the Key ID (English alphabet or number).
Remote ID
An optional setting
Specify the Remote ID for this IPSec tunnel to authenticate.
Select
User Name
for Remote ID and enter the username. The username may
include but can’t be all numbers.
Select
FQDN
for Local ID and enter the FQDN.
Select
User@FQDN
for Remote ID and enter the User@FQDN.
Select
Key ID
for Remote ID and enter the Key ID (English alphabet or number).
Note: Remote ID will be not available when Dynamic VPN option in Tunnel
Scenario is selected.
221
