Industry Cellular Gateway
VPN tunnel. Others will be transferred based on current routing policy of the
security gateway at PPTP client peer.
If you entered 0.0.0.0/0 in the Remote Subnet field, it will be treated as a
default gateway setting for the PPTP client peer, all packets, including the
Internet accessing of PPTP Client peer, will go through the established PPTP VPN
tunnel. That means the remote PPTP VPN server controls the flow of any
packets from the PPTP client peer. Certainly, those packets come through the
PPTP VPN tunnel.
Authentication
Protocol
1. A Must fill setting
2. Unchecked by
default
Specify one ore multiple
Authentication Protocol
for this PPTP tunnel.
Available authentication methods are
PAP
/
CHAP
/
MS-CHAP
/
MS-CHAP v2
.
MPPE Encryption
1. Unchecked by
default
2. an optional setting
Specify whether PPTP server supports
MPPE Protocol
. Click the
Enable
box to
enable MPPE.
Note: when MPPE Encryption is enabled, the Authentication Protocol
PAP
/
CHAP
options will not be available.
LCP Echo Type
Auto is set by default
Specify the LCP Echo Type for this PPTP tunnel. It can be
Auto
,
User-defined
, or
Disable
.
Auto
:
the system sets the Interval and Max. Failure Time.
User-defined:
enter the Interval and Max. Failure Time. The default value for
Interval is 30 seconds, and Maximum Failure Times is 6 Times.
Disable
: disable the LCP Echo.
Value Range
:
1 ~ 99999 for Interval Time, 1~999 for Failure Time.
Tunnel
Unchecked by default
Check the
Enable
box to enable this PPTP tunnel.
Save
N/A
Click
Save
button to save the settings.
Undo
N/A
Click
Undo
button to cancel the settings.
Back
N/A
Click
Back
button to return to the previous page.
256
