Industry Cellular Gateway
WAN Type= L2TP
When you select it, "L2TP WAN Type Configuration" will appear. Items and setting is explained below
L2TP WAN Type Configuration
Item
Value setting
Description
IP Mode
A Must filled setting
Select either Static or Dynamic IP address for L2TP Internet connection.
When
Static IP Address
is selected, you will need to enter the
WAN IP
Address
,
WAN Subnet Mask,
and
WAN Gateway
.
WAN IP Address
(A Must filled setting)
:
Enter the WAN IP
address given by your Service Provider.
WAN Subnet Mask
(A Must filled setting)
:
Enter the WAN
subnet mask given by your Service Provider.
WAN Gateway
(A Must filled setting)
:
Enter the WAN gateway
IP address given by your Service Provider.
When
Dynamic IP
is selected, there are no above settings required.
Server IP
Address/Name
A Must filled setting
Enter the L2TP server name or IP Address.
L2TP Account
A Must filled setting
Enter the L2TP username provided by your Service Provider.
L2TP Password
A Must filled setting
Enter the L2TP connection password provided by your Service Provider.
Service Port
A Must filled setting
Enter the service port that the Internet service.
There are three options can be selected :
Auto:
Port will be automatically assigned.
1701 (For Cisco)
: Set service port to port 1701 to connect to
CISCO server.
User-defined
: enter a service port provided by your Service
Provider.
MPPE
An optional setting
Select
Enable
to enable MPPE
(
Microsoft Point-to-Point Encryption)
security for PPTP connection.
33
