Industry Cellular Gateway
Value Range
:
1 ~ 16.
Profile
The box is checked by
default
Check the box to enable this profile.
Uncheck the box to disable this profile in dialing-up action.
Save
N/A
Click the
Save
button to save the configuration.
Undo
N/A
Click the
Undo
button to restore what you just configured back to the
previous setting.
Back
N/A
When the
Back
button is clicked, the screen will return to the previous
page.
Setup 3G/4G Connection Common Configuration
Here you can change common configurations for 3G/4G WAN.
3G/4G Connection Common Configuration
Item
Value setting
Description
Connection Control
By default
Auto-
reconnect
is selected
When
Auto-reconnect
is selected, it means it will try to keep the Internet
connection on all the time whenever the physical link is connected.
When
Connect-on-demand
is selected, it means the Internet connection
will be established only when detecting data traffic.
When
Connect Manually
is selected, it means you need to click the
Connect
button to dial up the connection manually. Please go to
Status >
Basic Network > WAN & Uplink
tab for details.
Note
: If the WAN interface serves as the primary one for another WAN
interface in Failover role( and vice versa), the Connection Control
parameter will not be available on both WANs as the system must set it to
“Auto-reconnect”
Maximum Idle Time
1. An Optional setting
2. By default
600
seconds is filled-in
Specify the maximum Idle time setting to disconnect the internet
connection when the connection idle timed out.
Value Range
:
300 ~ 86400.
Note
: This field is available only when
Connect-on-demand
or
Connect
Manually
is selected as the connection control scheme.
45
