LoRa Node
31
Class C
: C is for
C
(ontinuous). Same as A, but Class C devices will listen continuously for
responses from the gateway / network server. Hence, these devices use more power and
are often mains power.
Interval
:
Specify the time interval between two successive data uplinks. By default, 600 seconds is
configured. It means, the node will transmit the status of connected sensor/meters on
every 600 seconds time interval.
Finally, click
Save
button to store the configuration in the device.
Note:
DO NOT choose the Class C device type while it is powered by internal battery. The
device won’t get into sleep mode if it is configured as Class C device, and it will continuously
drain away the battery power even it is idle and just listens for the command from network
server.