4010 ATD LT ASSY/OPER/PARTS MANUAL (74303) 12/08
SAFETY
Safety decals appear at various locations on
your machine. The decals are provided for your
safety and must be kept clean. Replace any
decal that becomes worn, damaged, painted
over or otherwise diffi
cult to read. Replacement
decals are available through your specifi ed
dealer contact.
BEFORE OPERATING
Use extreme care when making adjustments.
When working under or around the machine
always lower shanks to the ground. It is not
recommended to set points with cast inserts
on cement as the impact may break the cast-
ing. We recommend setting blocks under the
shank to keep points from resting on cement.
After servicing, be sure all tools, parts, or service
equipment is removed from the machine.
Make sure there is no one near the machine
before or during operation.
DURING OPERATION
Reduce speed when cornering on fi eld ends and
when operating on or across dead furrows.
Do not attempt to remove any obstruction
while the machine is in motion.
Use extreme care when operating close to
ditches, fences or on hillsides.
No one other than the operator should ride on
the tractor.
Before and during operation be sure no one is
on or around the implement. Serious injury can
result from improper use.
ON HIGHWAY OPERATION
Comply with your local laws governing highway
safety when moving machinery on a highway.
Reduce road speed on corners.
Drive at a responsible speed to maintain com-
plete control of the machine at all times.
An S.M.V. emblem and safety lights must be
used at all times while traveling on public
roads.
15
