This set up guide contains installation instruction of the AMK DS82-B series of AMK’s Dante System
enabled network self amplified speaker. This speaker is designed to use in plenum rated ceiling
spaces and can be dropped into standard square (2’ x 2’ or 600mm by 600mm) or rectangular (2’ x 4”
or 600mm by 1200mm) false ceiling tile space with a tile bridge.
Important Safety Instructions.
WARNING:
May result in serious injury. Installation and service must be performed by authorized
personnel only
1. Read these instructions
2. Keep these instructions
3. Heed all warnings
4. Follow all instructions.
5. Do not use this speakers near water
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with manufacturer’s instructions.
8. Do not install these speakers near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Use only attachments/accessories specified by manufacturer
10. If the speakers have not been used for some time, unplug the speakers. Or when there is a
lightning storms, please unplug the speakers for safety.
Parts Check List
.
2 Speakers total with one main PoE operated speaker with three(1) passive speaker with
enclosures (The speaker enclosures are UL 2043 listed part no:
PKG213-8QMA
)
2 Speaker Grilles
3 Handy Box Covers
2 Electrically isolated ceiling tile bridges.
When removing the speakers from the packaging, please make sure that you keep the paint masking
card board in a safe place for any painting that is to be done after the installation.
For Suspended Ceiling Installations
Remove the ceiling tile from the selected speaker location that is to be cut from the ceiling, and an
adjacent ceiling tile for access.
12407 Mukilteo Speedway, Ste. 130
Lynnwood, WA 98087
p. 800.438-4026 f. 877.721.8107
tech@amkspeakers.com
www.amkspeakers.com
Installation Manual
DS82-B
Dante System Network Enabled Speaker
