Main Active Speaker Wire Connection:
Connect the audio wires connecting active
speakers to three passive speakers through
conduit. The audio wires needs to be
stripped for about half inch. Make sure that
the positive and negative, or hot and ground,
wires are correctly connected. Tie the wire
nut, place the connections inside of the handy
box. Close the handy box with the
connections provided.
For 70volt version,
SQ602T70V15W
, the hot, or plus wires will be in several wattages.
Choose the wattage that is used and connect to the plus (or hot) part of the audio wire.
The wattage of the each transformers are indicated on the speaker with different color
label.
Make sure to trim off the unused wattage wires and use the electrical tape tie them.
Place all the wires inside of the handy box. Close the handy box with the connections
provided.
Warranty
The speakers should be not open, altered, tampered without the consulting with
AMK, otherwise you will lose the warranty on the speaker. If the speaker is a need
for additional support for seismic mounting, please consult with AMK.
