Amkette Flash TV HD Media Player
Allied Electronics and Magnetics Ltd. All Rights Reserved
. 8
Rev#1.0b
4.
Power
Before switching off, be sure the player is in “standby” status to avoid damage to the
hard disk.
Player still consumes electricity in standby status.
5.
Connect to the Display device
There are 3 methods to connect FlashTV HD to the TV. The most preferred method is to
use the supplied HDMI cable. In the event that you do not have a TV with an HDMI input,
you can use the supplied A/V cable.
Connect CVBS output (yellow) to TV's CVBS input, L/R output to L/R input.
Connect YPbPr output to TV's YPbPr input.
Connect HDMI output to TV's HDMI input.
Attention:
The Player defaults to the PAL system composite video (The setting of signal-output
will be stipulated on the parameter section showed as following)
YPbPr does not support audio-function. Therefore, it has to be used together with
L(white)/R(red) sound or optical & Coaxial
Don't plug HDMI and AV terminal into the display device simultaneously. Otherwise it
may affect the clarity of a picture.
RETURN
Back to the previous screen
Rewind file upto 32x speed
VOL+
Press to turn up the volume
Forward file upto 32x speed
Play the previous file
VOL -
Press to turn down the volume
Play the next file
Summary of Contents for FlashTV HD
Page 1: ......
