background image

©Copyright Amkus Rescue Systems, Inc. 2010 - 2020 

LAS-001 June 22. 2020 Rev07

4

4.0 TRAINING

This product is designed for use by emergency services personnel to facilitate the extrication of victims from entrapment. Its use 

should be limited to trained personnel only. All personnel using this equipment are assumed to have completed a course of instruction 

acknowledged as being educationally sound by the local authority having jurisdiction over such training. This document contains 

basic operating and maintenance instructions only.

3.0 PROTECTIVE CLOTHING

Responsibility rests on the equipment’s operator to use and deploy appropriate protective clothing and equipment are used. Proper 

clothing and equipment provide protection from hazards to which personnel are exposed or could be exposed while working with 

this product.

2.1 PART IDENTIFICATION

Protective 

Rack Cover

Handle

Tool Connection 

Hose

Valve Manifold

Control Valve 

Handgrip

Removable Tip

Tip Release Button

Arm

Quick Connect

Coupling

4201 Montdale Drive, Valparaiso, IN 46383

1-800-592-6587  Fax:  1-219-476-1699

Model:  AMK-24 Spreader
Part Number:  320200001000
EN13204 Designation:  AS33/609-17.0
Serial Number: XXXXXXXX
Date of Manufacture:  11/20/16
System Pressure:  10,500 psi (724 bar)
Fluid Type:  AMKUS MV1

Summary of Contents for AMK-24









Reviews: