background image

©Copyright Amkus Rescue Systems, Inc. 2018-2020 

LAA-002 March 10, 2020 Rev02

2

DANGER

PERSONAL RESPONSIBILITY CODE

The member companies of FEMSA that provide emergency response 
equipment and services want responders to know and understand the 
following:

1. Fire

fi

 ghting and Emergency Response are inherently dangerous activities 

requiring proper training in their hazards and the use of extreme caution 
at all times.

2. It is your responsibility to read and understand any user’s instructions, 

including purpose and limitations, provided with any piece of equipment 
you may be called upon to use.

3. It is your responsibility to know that you have been properly trained in 

Fire

fi

 ghting and /or Emergency Response and in the use, precautions, and 

care of any equipment you may be called upon to use.

4. It is your responsibility to be in  proper physical condition and to maintain 

the personal skill level required to operate any equipment you may be 
called upon to use.

5. It is your responsibility to know that your equipment is in operable 

condition and has been maintained in accordance with the manufacturer’s 
instructions.

6. Failure to follow these guidelines may result in death, burns or other 

severe injury.

FEMSA

Fire and Emergency Manufacturers and Service Association

P.O. Box 147, Lynn

fi

 eld, MA  01940 • www.FEMSA.org

This manual does NOT address operation or servicing of AMKUS Rope Rescue Systems. Only competent rescue tool repair 
technicians are quali

fi

 ed to repair AMKUS equipment. This manual should be available to all personnel involved with AMKUS 

equipment.

This Safety Manual is not intended as a substitute for proper training in the use of rescue systems as taught from credible 
sources such as the National 

fi

 re Protection Association (NFPA), The International Fire Service Training Association 

(IFSTA), or sources approved by the Authority Having Jurisdiction (AHJ).

Examples of recent publications;

Standard for
Technical Rescuer Personnel
Professional Qualifications 

2017

1006

NFPA

®

•  NFPA 1006 2017 Edition - Standard for Technical Rescue Personnel Professional Quali

fi

 cations

•  IFSTA Fire Service Technical Search and Rescue, 8th Edition, ISBN: 978-0-87939-580-3
• •NFPA 1983 2017 Edition - Standard on Life Safety Rope and Equipment for Emergency Services

Summary of Contents for ARRS-1













Reviews: