©Copyright AMKUS Rescue Systems, Inc. 2020
LAL-001 August 11, 2020 Rev01
DANGER
Understand manual before use. Operating AMKUS Rescue Systems without understanding the
manual, receiving proper training, and using appropriate personal protective equipment is a
misuse of AMKUS equipment. Obtain safety information at amkus.com
This instruction manual is intended to familiarize operators and maintenance personnel with the
operation, basic maintenance, and safety procedures associated with this product. This manual
should be kept available to all operating and maintenance personnel.
This manual does NOT address Level 2 & 3 servicing of AMKUS Rescue Systems. Only competent
rescue tool repair technicians are quali
fi
ed to repair AMKUS equipment.
INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE
C750M
S320M
CT716M
Hydraulic Rescue Tools
AMKUS RESCUE SYSTEMS
AMKUS.com
4201 Montdale Drive, Valparaiso, IN 46383-4098 USA
800-592-6587 • 219-548-5000
CUTTER
Model: C750/C750M
SPREADER
Model: S320/S320M
COMBI TOOL
Model: CT716/CT716M
RATED INPUT PRESSURE
10,500 psi (724 bar) - designed to be driven only by an AMKUS hydraulic
power unit rated for this pressure
HYDRAULIC FLUID
AMKUS MV1 (Mineral Oil base)
Safety Data Sheet (SDS) for AMKUS MV1 Hydraulic Fluid is available at
AMKUS.com and CHEMTREC.com (for equipment stored and operated
in environments below 32°F (0°C) contact AMKUS Rescue Systems for
recommendation)
Certi
fi
ed Compliant to
NFPA 1936
