©Copyright AMKUS Rescue Systems, Inc. 2020
LAL-001 August 11, 2020 Rev01
13
8.0 ACCESSORIES
8.1 EXTENDED REACH SPREADER TIPS (ERT)
The spreaders use removable tips. To remove the spreader tip, use a thumb and
fi
nger to depress the spring loaded tip pins, and
remove the tips. To re-install the spreader tip, slide the tip back into place. Be sure that both pins return fully to their original positions.
The reach and versatility of the spreader can be increased by using the Extended Reach Tips (ERT). ERT tips are interchangeable
with the standard tips.
GATOR TIP
ERT
COMBO TIP 1
COMBO TIP 2
Figure 8.1
8.2 CHAIN USE
WARNING
Transport chain is NOT rated for overhead lifting. Injury or death may occur from improper chain
use. Observe chain safety guidelines established by the Authority Having Jurisdiction.
Chain kits are available for spreaders.
Setup and operation of the chain kit:
• Secure chains around the load removing slack using grab hooks
to latch fully across the chain (tip of hook must not be inserted
into holes of the chain link)
• Remove slack in the chain using quick adjust links (spreader)
• Tension the chain slightly and check to see that the connections
are stable and safe
• Activate the control valve actuator to close the arms and draw
the load
Figure 8.2A
Chain rating; 3/8” grade 70 Transport chain, working load limit 6600 lbs (2994 kg)
LOCK
RELEASE
Figure 8.2B
