Switch Menu to Text-Mode
Switch Menu to Graphical-Mode
Accessories
Setup a Wireless Connection
Setup a Wireless Connection
Setup a Host
Setting Power Management
© 2014 American Microsystems, Ltd. All rights reserved.
American Microsystems, Ltd. reserves the right to make
changes in specifications and other information contained
in this document without prior notice, and the reader
should in all cases consult American Microsystems, Ltd. to
determine whether any such changes have been made.
The information in this publication does not represent a
commitment on the part of American Microsystems, Ltd.
American Microsystems, Ltd. shall not be liable for technical
or editorial errors or omissions contained herein; nor for
incidental or consequential damages resulting from the
furnishing, performance, or use of this material. This
document contains proprietary information which is
protected by copyright. All rights are reserved. No
part of this document may be photocopied,
reproduced, or translated into another language without the
prior written consent of American Microsystems, Ltd.
2190 Regal Parkway
Euless, TX 76040
800.648.4452
www.amltd.com
Warranty Agreements
SVC-EW7500
SVC-EWP7500
Extended Warranty, 3 year, Triton w/o handle
Extended Warranty PLUS, 3 year, Triton w/o handle
SVC-EW7501
SVC-EWP7501
Extended Warranty, 3 year, Triton w/ handle
Extended Warranty PLUS, 3 year, Triton w/ handle
Safety NOM/NYCE-NOM-019-SCFI-1998
Safety of data processing equipment
4-Position Computer
or Terminal Charger
ACC-7525
Charging Cradle
4-Position Battery
Charging Cradle
From the Main Menu,
select “Settings and User
Options”.
Scroll down and Select
“Startup and Servers”.
Scroll down and select
“Text Mode”.
Use the <Enter> key to
toggle to “Disabled”.
Press <Esc> to save this
setting.
Reboot the Triton.
By default, the Triton will enter sleep mode in five (5)
minutes. To change this setting, follow the steps below.
1.
2.
3.
4.
5.
6.
From the Main Menu, select
“Admin” [F4].
Select “Power” [5].
Select “Sleep Timer” [1].
Use the left and right arrow
keys to set the “Sleep Timer”.
Setting this value to zero will
disable the “Power
Management” feature.
Press <Esc> to save settings.
1.
2.
3.
4.
5.
From the Main Menu,
select “Admin” [F4].
Select “Network” [1].
1.
2.
For “Radio Setup”, select
“Wireless” [2].
For “Wireless Security”, select
“Security” [3].
3.
4.
Within the “Radio Setup”
menu, enter the applicable
information.
Press <Esc> to go back to
“Network Setup”.
5.
6.
Within the “Wireless Security”
menu, configure the wireless
encryption to that of the wireless
network.
Press <Esc> to go back to
“Network Setup”.
7.
8.
Once settings are complete,
the device will prompt a “Radio
Reboot”. Select “Yes.”
Reboot the Triton by pressing
and holding the <Power> key.
9.
10.
From the Main Menu, select
“Admin” [F4].
Select “VT Setup” [2].
Select “Hosts” [1].
Select “Host 1” [1].
Set the host IP address and
emulation method for the
selected host.
Press <Esc> to save settings.
1.
2.
3.
4.
5.
6.
From the Admin Menu,
select “Startup”.
Scroll down and Select
“Startup and Servers”.
Scroll down and select
“Text Mode”.
Use the <Enter> key to
toggle to “Enabled”.
Press <Esc> to save this
setting.
Reboot the Triton.
1.
2.
3.
4.
5.
6.
