5.7.7 Ex citer: Oil level / Oil change
•
Un screw vent ing screw (3), oil fill ing plug/dip stick (1) and oil
drain plug (2).
•
Drain-off old oil.
•
Screw-in oil drain screw (2).
•
Fill-in new oil through the oil fill hole (1). See lu bri ca tion plan
for quan tity and qual ity.
•
Re place oil fill ing plug/dip stick (1) and vent ing screw (3).
•
Un screw oil fill ing plug/dip stick (1), check the oil level again
and top up with oil if nec es sary.
5. Main te nance
64
Important
Check / change ex citer oil when its warm.
APR 3520: The vent ing screw (3) must al ways first be
un screwed when check ing the oil level or chang ing
the oil.
Danger
Care is to be taken with the drain ing of hot oil:
Dan ger of scald ing!
Environment
Col lect oil which has run out or over flowed and
dis pose it in an en vi ron ment friendly man ner.
B3299093
2
1
3
Attention
When the dip stick is screwed in, the op ti mal oil
level is be tween the «
MIN
» and «
MAX
» mark ings.
B3
29
90
9
4
MIN
MAX
1
MOTORÖL
ENGINE OIL
API SG-CE
SAE 10W40
