Data registration
Ammonit GmbH / 2005 - 2009
33
The start signal can also lead to a text message (SMS) being sent to a pre-set
GSM-number. This function can be switched on by the recipient sending the
message "E+" to the Logger. This is a very simple way of achieving an
automatic alarm when the wind speed exceeds a chosen value. Please note that
in the case of repeat events, a new text message will be sent each time. The
function can be switched off at any time by sending the message "E-".
The data is stored in text files in a separate directory. At the start of every file a
line specifies the time when the start signal was received. The number of
columns and the order of the data in a line are always the same, however many
sensors are attached: the first three columns are for the 3 anemometers, and
this is followed by the values for the two wind vanes.
In the example only one sensor was attached in each case:
E 02/27/03 11:57:00 1*1
57 0 0 257 777
56 0 0 257 777
54 0 0 256 777
56 0 0 257 777
61 0 0 254 777
60 0 0 253 777
61 0 0 251 777
61 0 0 252 777
etc.
... in all 180 lines (900 measurement values)
Summary of Contents for METEO-32
Page 35: ...Ammonit Data Logger Manual 34 Ammonit GmbH 2005 2009...
Page 47: ...Ammonit Data Logger Manual 46 Ammonit GmbH 2005 2009...
Page 57: ...Ammonit Data Logger Manual 56 Ammonit GmbH 2005 2009...
Page 73: ...Ammonit Data Logger Manual 72 Ammonit GmbH 2005 2009 4 plug Xtend Plan view Data Logger...
