RS485 Functions
Ammonit GmbH / 2005 - 2009
59
9.
Maintenance and service
The Data Logger generally operates without the need for maintenance. In long-
term operation it is important to ensure that all ports are well closed if they are
not in use and that the batteries are replaced in good time. Check the overall
set-up once in. The maintenance intervals for the individual sensors are
specified in the data sheets supplied with them. If very high accuracy is
required, or conditions are very demanding it may be necessary to exchange or
recalibrate sensors in the course of a measurement campaign.
The drying agent should be checked at least once a year
It is possible to reactivate the Desiccant in an air-flow Dryer at 90°C. If it is
filled into desiccant bags you can apply the same regeneration process, but
the number of regeneration cycles is limited to 2 - 3.
After ending a lengthy measuring campaign
After dismantling the measurement system, it is the ideal opportunity to check
all the components for possible wear and damage. The maintenance can also
include the re-calibration of the sensors if necessary.
Store without batteries
When the batteries are inserted the logger works completely automatically.
When storing it for a long time take out the batteries.
Information about hardware and software versions
To get the actual hardware and software information of the unit, containing the
version number and date, press the "Select" button, hold it, and additionally
press the "Up" button. Please note the displayed text, before You contact our
service.
Summary of Contents for METEO-32
Page 35: ...Ammonit Data Logger Manual 34 Ammonit GmbH 2005 2009...
Page 47: ...Ammonit Data Logger Manual 46 Ammonit GmbH 2005 2009...
Page 57: ...Ammonit Data Logger Manual 56 Ammonit GmbH 2005 2009...
Page 73: ...Ammonit Data Logger Manual 72 Ammonit GmbH 2005 2009 4 plug Xtend Plan view Data Logger...
