background image

Package Contents

A.  (1) Fixture Body
B.  (2) Stake

Product Dimensions

This luminaire is intended for installation in accordance with local codes 

and the National Electric Code (NEC). Failure to adhere to these codes and         

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation, 

operation maintenance or mounting situations.

     

1.  Make sure that the power is turned OFF before installing or servicing this 

luminaire.

2.  WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M) 

or more from pool, spa or fountain.

3.  This luminaire is intended to be used only with a power supply       

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4.  Wiring connections must be made with UL Listed wire connectors that 

are suitable for outdoor use.

5.  Position the low voltage wire and wire connector so that it is located 

within 6 inches (15.2 cm) from a building structure, a luminaire or fitting.

6.  The main low voltage cable is intended for shallow burial - less than 6 

inches (152 mm).

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS.

1.  Turn off/unplug and allow to cool before replacing lamp.
2.  Lamp gets HOT quickly! Contact only switch/plug when turning on.
3.  Do not touch the hot lens, guard or enclosure.
4.  Keep lamp away from materials that may burn.
5.  Do not touch lamp at any time. Use a soft cloth. Oil from skin may     

damage lamp.

6.  Do not operate the luminaire fitting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

Parts Required

A.  (2) MR11 Lamps
B.  (1) Stake Cover (optional)

6”

2.7”

26.2”

4.5”

3.2”

14.65”

- 3 -

- 2 -

AMP

®

 Dual Mini PinnaclePro Path Light (Lamp Ready)

APL-3015-B-BZ

INSTALLATION & MAINTENANCE GUIDE

Important Safety Instructions: Read Before Installation

!

Important Safety Instructions: Read Before Installation

!

w w w. a m p l i g h t i n g . c o m

customersupport@amplighting.com • 813.978.3900

Summary of Contents for APL-3015-B-BZ






Reviews: