![background image](http://html1.mh-extra.com/html/amp-lighting/apl-3015-b-bz/apl-3015-b-bz_installation-and-maintenance-manual_2933942004.webp)
Adjust Angle of Fixture Body
7
Install/Replace Lamp
Loosen the set screw on glare guard, remove the glare guard and the
shield to expose the lamp. Replace it with the correct wattage and
type marked on the fixture label. Then reinstall the shield and glare
guard and tighten with the set screw.
IMPORTANT: Halogen lamps must be protected from moisture and
dust at all times. Always reinstall the shield and glare guard when
moved.
Allen Wrench
Using an Allen Wrench, loosen the
adjustment screws and modify
the fixture bodies to the desired
angles. Then tighten the
adjustment screws.
Wire Connections
6
Pigtail
Main Supply Cable
Wire Connectors
Strip both leads from the luminaire pigtail. Using two wire
connectors (sold separately), connect the leads from the
luminaire to the main supply cable leads.
Adjustment Screw
- 7 -
- 6 -
AMP
®
Dual Mini PinnaclePro Path Light (Lamp Ready)
APL-3015-B-BZ
INSTALLATION & MAINTENANCE GUIDE
w w w. a m p l i g h t i n g . c o m
customersupport@amplighting.com • 813.978.3900