customersupport@amplighting.com • 813.978.3900
–5–
INSTALLATION & MAINTENANCE GUIDE
4
5
Determine the desired location
for mounting the stake mount.
Hammer the stake into the
ground until flange of stake is
flush to grade. To avoid damage
to the stake, place a board on
top of the stake while hammer-
ing.
Note: If the ground is hard and
the stake is difficult to install,
make a crosscut in the ground
using a flat shovel.
Board
Ground
Soil
Stake
Install Stake
Install Fixture to Stake
Pass the fixture wire through
the center hole of the stake.
Thread the fixture body onto
the stake and hand tighten until
snug.
Fixture
Ground
Soil
Stake
Cable
AMP
®
LucidPro MR16 Spotlight (Lamp Ready)
AAL-1031-4-B-BZ
