19
5.4.6 Editing menu
Pressing F2 then F4 from the main menu allows you to access
to the Editing submenu.
The following functions are available:
F1
Rename It permits the replacement
of the name of a program
previously filed
F2
Copy
It allows you to duplicate
a program previously filed
F3
D e l e t e
It allows you to delete a
program previously filed
F4
Search
It permits a quick search
of a code number or name
of a program previously
memorized
When you are in this menu, you can also create
new programs.
To prevent accidental variations or deletions
of the existing programs, the editing service
is protected by an access key (password).
To enter into the Editing sub-menu you must type the access
code which can be input:
- Before entering into the Editing menu by pressing F5
- After entering into the Editing menu by pressing F5 or F6
On the display you will see the request for the access code :
5678
To return to the previous selection
always press the MENU key from the
sub-menu.
5.4.5 Machine zero point (homing)
The V-nail driver can be positioned on zero (0)
by pressing F4 on the manual functions menu.
To disable this option press SHIFT again: the diode goes
off.
To delete a wrong entry shift back the <== arrow then press
DEL as many times as the number of characters you wish to
delete. To add a space press on SPACE.
5.4.10Search
Pressing the F4 key, appears 3 searching sub-groups
represented by F1 , F2 , & F3 keys.
F1 Allows you to search the name of the program.
F2 Allows you to search the code (step) of the program.
F3 Permits the access tothe first free programming step.
5.4.11 Creation of new programs
To create a new frame program, perform the following steps:
From the main menu press F2, then press F4.
Press F5 or F6 & type in the editing password 5678.
Position the cursor on a free program code line.
Type in the new program name & press ENTER
At this point the following screen is displayed:
5.4.7 Rename
Position the cursor on the line corresponding to the program
you wish to rename using the yellow arrows, then press F1:
type in the new name and confirm it by pressing on ENTER.
If you wish to use the letters
corresponding to the keys, press SHIFT:
the diode inserted in the button is
l i t .
To return to the previous selection
always press MENU, from the sub-
menu.
5.4.8 Copy
Position the cursor on the line corresponding
to the program you wish to copy by using the
yellow arrows.
Press F2: use the yellow arrows to move the cursor on a new
field, press F1 and digit the new program name (use DEL to
delete exceeding characters)
5.4.9 Delete
Position the cursor on the line corresponding to the program
you wish to delete by using the yellow arrows , then press
F3. You will see a box that says:
Cancella da: 1 = delete from code # 1
fino a: 1 = delete to code # 1
The first code number Cancella da:..? will be the one that
you positioned the cursor on. You must type in the fino a: or
delete to code number. This will be the code number you
want to set as the final one to delete. Then confirm it by
pressing ENTER.
If you wish to use the letters instead of numbers,
press SHIFT & the letters to be inserted.
The icon indicates that the editing
access is enabled
The icon
indicates that the editing
access is not enabled.
Summary of Contents for Mitre-Mite VN4 MemoryProgram
