EN
GPS-M5 / Free and Save 052014
Copyright by AMPAROS
17
5.22. Geo-fence
Set up a geo-fence for the unit to restrict its movements within a district. The
unit will send the message to the authorized numbers when it breaches the
district.
5.22.1
Set up: When the unit stays immobile in a place for 3-10 minutes, the
user can Send
SMS: “spspace+latitude,longitude;
latitude,longitude” to unit to set the restricted district. In case of breach, it will
send SMS “stgeo-info” to the authorized numbers
Note:
The first latitude&longitude is coordinate of the top left corner of the
Geo-fence, while the second latitude&longitude is the coordinate of the
bottom right corner.
5.22.2
Cancel: Send SMS:” nospassword” to deactivate this
function.
5.23. Multi-area management
5.23.1
Set Area
Send SMS command
"area+pspace+latitude,lospace+areaname,distanceM" to
tracker(distance unit: M for meter, K for kilometer), it will reply "area01 ok".
Fox example: Send "area123456 22.353648,113.543678 school,800M".
Note: 5 areas at most and the distance between two points can't be less
than the total distance in the 2 commands, and different areas can't cover
each other.
5.23.2.
Delete areas
Send SMS command:"pspace+area name", tracker will
reply:"noarea ok".
5.23.3
Rename and set distance
Send SMS command "pspace+old name;new name,
distanceM" to tracker, if name is not repeated and area doesn't cover others,