CPS-A USER MANUAL
ISPB028 R1
Page 10
6
Warnings for the Use of the CPS-A
WARNING!
This equipment is not designed to receive standard single-phase 220-250Vac from normal
power supply so there is a need to be careful about its use. To allow for full serviceable life
of the product & not to void the warranty, be sure to comply with the following:
1.
The input Voltage Range must be correct and connected to the designated input terminals
2.
The load must be connected to the designated output DC terminals.
3.
Do not allow any ingress of any form of foreign objects into the equipment.
4.
Do not allow any alteration to this product that might violate the Intrinsic Safety as the consequences could be fatal.
No alteration shall be made without written permission from Ampcontrol Pty Ltd.
5.
Do not allow the equipment to operate beyond the specification. This will compromise the service life & result in
premature failure.
7
Product List
There are five models of CPS-A power supply each with a unique rating to facilitate a specific load requirement. These are
listed below:
1.
121307
CPS-A – 15.1V/0.469A Output
2.
141207
CPS-A – 15.1V/0.51A Output
3.
121152
CPS-A – 15.1V/1.5A Output
4.
121155
CPS-A – 12.6V/2.0A Output
5.
121149
CPS-A – 12.6V/2.4A Output
See Table 3.2, Specification for
