ISUPS2B004 Rev 1
Page 34 of 70
Ampcontrol Pty Ltd
– ABN 28 000 915 542
ISUPS 300Wh V2 USER MANUAL
ISUPS2B004 R2
– DEC/17
of the RIGHT button will move focus to the top left of the menu.
The LEFT button will allow either the previous character to be selected for editing; except if the block is
already in the upper-left corner of the display, the last character will be moved into focus.
The ENTER button saves the setting into memory. Press the ESC button to return to the User Defined
Label Menu (second Major Sub-menu).
NOTE
This menu has no default display
– it will appear as a blank screen after
factory initialisation
10.4 Password Management Menu
– 3
rd
Major Sub-Menu
6C.Change Password
Press the UP button to access the Password Management Menu. Under this menu there is an editable
menu that will allow the operator to enter the new password. To enter, press the RIGHT button.
10.4.1 Password Change Menu
New Password:
>0< * * *
The Password Change Menu allows the user to change the configuration menu entry password.
Pressing the UP or DOWN buttons will change the password digit with the focus up or down,
respectively. Pressing the RIGHT button will move the focus to the next digit. The LEFT button will move
the focus to the preceding digit, providing that it is not the first digit (left-most digit). If the focus is on the
first digit, and the LEFT button is pressed, then it will move the focus to the last digit.
The ENTER button saves the setting into memory. Press the ESC button to return to the Password
Management Menu (third Major Sub-menu).
CAUTION!
Be sure to set the new password to a value that is easily remembered
because access cannot be gained to the configuration settings without
the password.
A lost or forgotten password will require returning the unit to Ampcontrol
for resetting.
