7
NOTE:
If using this battery charger/maintainer for a marine
battery, the battery must be removed and charged on shore
unless you have purchased special equipment designed for
marine use to allow for onboard charging.
Check the polarity of the battery posts. Note: The positive
(+) post is usually larger in diameter than the negative (-)
post.
The length of the cord external to the battery charger and
including the attachment plug shall not be less than 6 feet
(1.8m) as measured from the face of the attachment plug to
the point of attachment or entry.
Connect the red positive (+) charger clip to the positive (+)
battery post.
When disconnecting the charger/maintainer, always use
the reverse order from the connection process, staying as
far away as possible from the battery.
AC POWER CORD/PLUG CONNECTIONS AND PROPER
GROUNDING
This battery maintainer is designed for use on a 120V
circuit. Always plug the AC power cord/plug into a properly
grounded outlet that follows all local ordinances.
NEVER change or alter the AC power cord or plug pins.
