AMPEON AMP-Series
http://www.ampeon.cn
31
infrared detector detects that there is spark inside the wool fiber, it will make the fire
alarm with sound and light immediately. Related equipments such as blower fan will
be automatically stopped. In the meantime, diverting executive structure will act to
discharge wool flow with fire and combustible scraps into the sundries box. Through
this, we can assure that spark will not enter the next procedure. AMP119AII type is
newly developed spark diverter produced by Jiangsu Ampeon Electron Co., Ltd.
Through the usage of double detector, it can avoid the blind area. It is also equipped
with clock function and it can record 20 alarm messages. Alarm content can include
the year, month, date, hour and minute of the fire alarm.
3. Dust filtering system is also apt to fire alarm. AMP-119C type diverter utilizes
the structure of main frame & detector separation .So the installing is simple, the
disposition is flexible. Each mainframe may be equipped with 1-15detectors
according to the need
。
Through the installing of detector on the route of dust filtering
system pipe, over the dust room and near the compactor, we can prevent the spark
from expanding and causing fire effectively, so it can assure the safety production of
the whole blowing and carding procedure.
C. The management assurance for prevention of blowing and carding line fire
alarm
The strengthening of management is the key factor of decreasing fire
alarm, good running(operation) management and equipment management can
completely avoid the happening of the fire alarm.
1. When the wool is packaged in bags, the operator should tidy up all the
iron wire and wrap cloth and manage to be cut basically flat in height. Make the cloth
waste and wasted rugs distribute evenly. While packaging, there should be personnel
to supervise and check.
2. The wasted rugs must be torn and packaged before using, control the sundries
such as cutters and pipes.
3. Ask the scotching operator to do the patrol well, immediately find and remove
the sundries in the bag. Furthermore, immediately remove the sundries in the collect
box of metal and spark diverter.
4. Inspect and test the sensitivity and other various functions of metal and spark
diverter. Through this, we can keep the metal and spark diverter in good working
status.
5. There should be counter plan regarding the fire alarm disposition. When fire
alarm happens in the blowing and carding procedure, scotching operator should not
be in a pucker. Furthermore, for the proper handling, training and guidance is needed.
You should arrange corresponding staff to study various prevention and salvage
knowledge and understand the basic function and alarm message of metal and spark
diverter.
Improper handling may cause the fire to expand. (transferred from the
website of Jiangsu Ampeon: http://www.ampeon.cn)