AMPEON AMP-Series
http://www.ampeon.cn
2
and negative pressure.
i. The whole machine is convenient and simple, easy to install and debug, and it
does not need special maintenance and care.
j. It has RS-232communication connector and it can communicate with special
APU-01 human-machine and adapt to the computer network management and remote
control of the workshop.
Figure1: Diagram of safety equipment layout in blowing-carding joint
production line
2. Explanation of the principle
2.1 Spark diverter
When the beater of a bale plucker strikes metal material or the spindle end of the
beater is tangled with fiber, it may generate sparks, and the sparks can mix in the
fiber and move into the conducting duct under the action of the wind. When the
cotton fiber mixed with sparkles moves through the high sensitive infrared probe
detecting area, the controlling program will immediately make the fire alarm with
sound and light. Furthermore, while stopping the running of related equipments such
as blower fan etc., the cotton flow with sparkle and combusting scraps are discharged
into collect box to assure that the sparkle will not enter the next procedure and
eliminate the hidden trouble of fire.
2.2 Metal diverter
In cotton noil, there are generally metal sundries such as iron wire scraps, screw,
washer, metal reed and so on. While mixed with fibers, they are transported through
the detecting area of metal probe, the metal probe circuit will drive the diverter after
distinguishing, and then discharge the cotton flow with sundries into the collect box
to prevent the metal sundries from entering the blower equipments in the next
procedure to cause the hidden trouble of fire and the damage of machinery such as